Introduction
Knowing how to swap a strap on the RESSENCE TYPE 11 is one of those practical skills that pays dividends every time you want to shift the watch’s personality — whether that means moving from a calfskin to a rubber for the weekend, or simply refreshing a worn band without a trip to the boutique. The process is straightforward, provided you work methodically and respect the watch’s finishing.
Tools You Will Need
Before you begin, set aside a replacement strap sized for the RESSENCE TYPE 11, a quality spring bar tool, and a soft cloth large enough to cushion the watch face-down on your work surface. Those three items are genuinely all that is required.
Step-by-Step Guide
Step 1: Prepare Your Workspace
Choose a clean, flat surface and fold the soft cloth beneath the watch. Working on a bare desk risks scratching the case or crystal if the watch shifts during the process — a small precaution that protects what is, after all, a serious investment.
Step 2: Remove the Existing Strap
Position the forked tip of the spring bar tool against the spring bar where it meets the lug, then apply steady inward pressure until the bar compresses and the strap pulls free. Use only as much force as necessary; the lugs on the TYPE 11 are precisely finished, and gouging them with an over-leveraged tool is an avoidable mistake.
Step 3: Clean the Lugs
With the old strap removed, run the soft cloth along the inner faces of both lugs. Dust and fine debris collect there over time and, left in place, can work against a secure fit for the new strap.
Step 4: Attach the New Strap
Seat the new strap’s spring bar between the lugs, aligning it carefully with both lug holes. Press the bar home with the spring bar tool until you feel and hear the distinct click of it locking into position. Confirm the alignment visually before proceeding — a bar that has caught on only one side will release under tension.
Step 5: Final Adjustments
Give the strap a firm tug along its length to verify the spring bars are fully engaged, then put the watch on and check that it sits naturally on the wrist without any lateral play at the lugs.
Conclusion
The whole operation takes only a few minutes once you have done it once, and it opens up the TYPE 11’s versatility considerably. For a deeper look at the full RESSENCE lineup, explore RESSENCE collections on WATCHESPEDIA.
Frequently Asked Questions
What tools do I need to change the strap on a RESSENCE TYPE 11?
You will need a new strap that fits the RESSENCE TYPE 11, a spring bar tool, and a soft cloth to protect the watch during the process.
How do I remove the existing strap from my RESSENCE TYPE 11?
Using the spring bar tool, gently push the spring bar inwards to release the strap from the watch case, being careful to apply only enough pressure to avoid damaging the watch lugs.
Why is it important to clean the lugs after removing the old strap?
Cleaning the lugs of your RESSENCE TYPE 11 with a soft cloth eliminates any dust or debris that may have accumulated, ensuring a clean attachment point for the new strap.
