What to Know First
- The Armin Strom Mirrored Force Resonance Red (reference ST25-RF.10) is a 43 mm stainless steel watch featuring an off-centre red guilloché dial and the in-house Calibre ARF21, which synchronises two independent balance wheels through a patented Resonance Clutch for enhanced chronometric stability, limited to 15 pieces worldwide at CHF 78,000.
- The red guilloché dial is produced on a traditional hand-operated rose engine lathe; black azuré chapter rings frame the surface and carry the facetted hour markers.
- Calibre ARF21 houses two complete, independent movements within one calibre, each with its own barrel, gear train, escapement and regulating organ.
- A pusher at 2 o’clock resets both seconds hands to zero simultaneously, allowing direct visual verification of synchrony.
- Edition size: 15 pieces worldwide.

Design and Dial Artistry
The red guilloché surface is produced entirely by hand on a rose engine lathe, a technique that traces radiating patterns across the dial as the lathe rotates. No two passes are mechanically identical, so the finished surface changes character under shifting light, from deep scarlet at oblique angles to a brighter, almost luminous red face-on.
Black azuré chapter rings encircle the guilloché field, their own fine circular texture set in deliberate contrast to the radial pattern beneath. The facetted hour markers, mounted directly on those rings, sit slightly proud of the guilloché surface, creating a layered visual depth that also preserves legibility without recourse to a conventional chapter ring overlay.

Colour and Strap Pairing
Against the vivid dial, the 43 mm stainless steel case reads as deliberately neutral. The dark grey Alcantara strap with white stitching follows the same logic: it keeps the eye anchored to the dial and the visible movement rather than competing with either. The result is a wrist presence that is confident without becoming decorative excess. Within the collection, the Red sits alongside the Mirrored Force Resonance Ruby as the most chromatically assertive expression of the family.
Movement and Engineering
Calibre ARF21 is entirely designed, developed and produced in-house in Biel/Bienne. Its architecture places two complete, independent movements within a single calibre: each carries its own barrel, gear train, escapement and regulating organ, running at 3.5 Hz (25,200 vibrations per hour) with a shared 48-hour power reserve across 276 components and 39 jewels.
The Resonance Clutch, patented by Armin Strom, continuously exchanges the vibrations of the two balance wheels. Over time, this exchange drives the wheels into harmonic resonance, where each oscillation reinforces the other. The practical result is improved rate consistency: external disturbances that would knock a single-regulator movement off pace are progressively damped by the counter-influence of the second wheel. The Dual Time GMT Resonance Aventurine applies the same architecture in a different complication context, illustrating how central the resonance platform has become to Armin Strom’s identity.

Hand Finishing and the Caseback
Sapphire crystals on both the dial side and the caseback expose the full extent of Armin Strom’s finishing work: hand-polished bevels, frosted surfaces, perlage and circular graining across the bridges, with black-polished screws throughout the calibre. On the reverse, technical inscriptions on the main plate are executed in three-dimensional relief, raised directly from the surface rather than engraved into it. Every watch is assembled twice before leaving the manufactory, a quality-control protocol that appears across the entire Armin Strom range, including the Tribute² Aurum.

Availability and Edition Details
Reference ST25-RF.10 is produced in an edition of 15 pieces worldwide, priced at CHF 78,000. For full details and authorised retailer information, visit Armin Strom directly.

| Movement | Armin Strom Manufacture Calibre ARF21, manual winding |
| Frequency | 3.5 Hz (25,200 vph) |
| Power Reserve | 48 hours |
| Components / Jewels | 276 components, 39 jewels |
| Case Material | Stainless steel |
| Diameter | 43 mm |
| Height | 11.55 mm |
| Lug-to-Lug | 49.60 mm |
| Water Resistance | 3 ATM |
| Crystal | Sapphire, front and back, anti-reflective treatment |
| Strap | Dark grey Alcantara, white stitching, stainless steel pin buckle |
| Edition | 15 pieces worldwide |
| Price | CHF 78,000 |
For more on horology that matters in the Gulf, sign up for our weekly editorial briefing.
| Movement | Armin Strom Manufacture Calibre ARF21, manual winding, two independent regulating systems connected by a resonance clutch, 3.5 Hz (25,200 vph), 48-hour power reserve, 39 jewels, 276 components |
| Case size | 43 mm diameter, 11.55 mm height, 49.60 mm lug-to-lug |
| Case material | Stainless steel |
| Water resistance | 3 ATM |
| Price | CHF 78,000 |
Frequently Asked Questions
What movement powers the Armin Strom Mirrored Force Resonance Red?
The watch houses the in-house Manufacture Calibre ARF21, which integrates two complete, independent movements within a single calibre, each with its own barrel, gear train, escapement and regulating organ. The two balance wheels are synchronised through Armin Strom's patented Resonance Clutch, operating at 3.5 Hz with a 48-hour power reserve.
How many pieces of the Mirrored Force Resonance Red are being produced?
The Mirrored Force Resonance Red, reference ST25-RF.10, is limited to 15 pieces worldwide.
What is the price of the Armin Strom Mirrored Force Resonance Red?
The Mirrored Force Resonance Red is priced at CHF 78,000.
What makes the dial of the Mirrored Force Resonance Red distinctive?
The off-centre red dial is produced on a traditional hand-operated rose engine lathe, creating a guilloché pattern with radiating reflections. Black azuré chapter rings frame the guilloché surface, and facetted hour markers are mounted directly on those rings, visually bridging the two dial elements.
Where is Armin Strom based, and how are its watches produced?
Armin Strom is an independent watch company based in Biel/Bienne, Switzerland. Every timepiece is designed, developed and assembled entirely in-house, with each watch assembled twice to guarantee mechanical precision and finishing excellence.



