HomeWATCHESDENNISONDENNISON - Collectability Unveil Their Second Collaboration

Top 5 This Week

Related Posts

DENNISON – Collectability Unveil Their Second Collaboration

Key Highlights

  • Second collaboration between Dennison and Collectability, following the successful 2025 debut series
  • Design conceived in Geneva by Collectability founder John Reardon and Swiss designer Emmanuel Gueit, inspired by 1960s asymmetric watchmaking
  • Two dial variants — Oblique Enigma and Oblique Vector — each in two colorways, for four distinct references
  • Case in stainless steel or gold PVD; 35 x 33.6 mm; 6.05 mm thick; Swiss quartz Ronda Cal. 1062 movement; sapphire crystal
  • Available exclusively to pre-order for one week: May 27 – June 3, 2026
  • Priced at $790 USD / 620 CHF / 675 EUR (taxes and tariffs excluded)
Dennison Collectability 2026 Edition Oblique Collection — Enigma dial with blue sunburst and green surround
The Oblique Enigma dial — blue sunburst inner finish framed by a diamond-cut metallic border, set within a rich green surround.

A Design Born on a Single Sheet of Paper

The genesis of the Dennison + Collectability 2026 Edition is disarmingly direct. Last autumn in Geneva, John Reardon and Emmanuel Gueit sat down with a shared obsession — the asymmetric case architecture that defined a generation of 1960s Swiss watches — and a single sheet of paper. Gueit committed the sketch, and the direction was settled before the conversation ended. That clarity of intention is evident in the finished object.

Gueit is the creative intelligence behind some of the most commercially enduring watch silhouettes of the past three decades, and his involvement signals an ambition that extends well beyond a typical branded co-release. The brief, as both parties describe it, was to advance the Dennison design language rather than simply revisit it — to move forward with the same emotional logic that made the first collaboration resonate.

The Oblique Form

Where the inaugural Dennison + Collectability edition established the brand’s case personality, the 2026 Edition transforms it. The asymmetric opening cut into the case creates a geometrically shaped dial aperture that unsettles the eye in the best possible way — producing a sensation of movement even when the watch is stationary. At 35 x 33.6 mm and 6.05 mm thick, the proportions are precise, and the stainless steel or gold PVD case finishes keep the execution disciplined.

The Philosophical Position

Reardon has spent his career arguing that serious collecting and accessibility are not mutually exclusive positions. The Dennison partnership is a direct expression of that belief. At $790 USD, the 2026 Edition sits in territory rarely occupied by watches with this level of design provenance — a calculated choice, not a concession.

Dennison Oblique Vector dial in gold with sunray finish and black radiating lines
The Oblique Vector in gold — twelve radiating lines over a warm gilt sunray finish, contrasted by sharp black detailing.

Two Dials, Four Characters

Oblique Enigma

The Enigma dial is the more atmospheric of the two. An inner blue sunburst finish sits within a diamond-cut metallic border, itself framed by a rich green sunburst surround. The layering of finishes and the deliberately off-centre composition produce something that reads differently depending on the light — and on the angle. There is a deliberate sense of incompleteness to it, as though the dial is mid-rotation, inviting the wearer to look again.

Oblique Vector

The Vector dial addresses a different register. Twelve lines radiate from the centre in a composition that is geometric and kinetic. In the gold reference, a warm gilt sunray ground carries contrasting black lines; in steel, a silvered sunray hosts blue lines instead. Both versions achieve something relatively rare in this price category: a monochromatic discipline that reads as considered rather than merely economical.

Dennison Oblique Collection 2026 — stainless steel case profile, 35 x 33.6 mm
The stainless steel case at 35 x 33.6 mm — a slim 6.05 mm profile housing the Swiss quartz Ronda Cal. 1062.

Specifications and Availability

The movement is a Swiss quartz Ronda Cal. 1062 — a sensible and reliable choice for a design-forward watch at this price point. The sapphire crystal and embossed leather strap complete a specification sheet that prioritises coherence over specification inflation. The collection ships in four references: Enigma and Vector, each in steel or gold PVD.

Pre-orders open May 27 and close June 3, 2026. The window is fixed and will not be extended. This structure — one week, no exceptions — is consistent with how Dennison and Collectability managed their first release, and it suits the collector sensibility both parties bring to the project. Those following this partnership through Watches and Wonders and the broader independent watch calendar will recognise the format.

Dennison x Collectability Oblique Enigma dial close-up showing asymmetric geometric layout
Oblique Enigma close-up — the asymmetric geometric composition that Gueit describes as creating tension, balance, and a different emotion on the wrist.
Dennison Oblique Vector dial in steel with silvered sunray finish and blue lines
The Oblique Vector in steel — a silvered sunray ground with blue radiating lines, balancing restraint with precision.
Dennison Collectability 2026 Edition — embossed leather strap detail
Embossed leather strap — completing the four-reference Oblique Collection with a finish consistent with the watch’s design intentionality.

For more on horology that matters in the Gulf, sign up for our weekly editorial briefing.

Frequently Asked Questions

What is the design inspiration behind the Dennison + Collectability 2026 Edition?

The watch was conceived in Geneva by Collectability founder John Reardon and Swiss designer Emmanuel Gueit, inspired by the asymmetric case architecture that defined 1960s Swiss watchmaking. The design was sketched on a single sheet of paper during their autumn meeting and aims to advance the Dennison design language rather than simply revisit it.

How many dial variants does the Dennison + Collectability 2026 Edition offer?

There are two dial variants — Oblique Enigma and Oblique Vector — each available in two colorways, creating four distinct references. The Enigma features an inner blue sunburst finish within a diamond-cut metallic border and rich green surround, while the Vector displays twelve radiating lines over a sunray finish with contrasting detailing.

What are the specifications and price of the Dennison + Collectability 2026 Edition watch?

The watch measures 35 x 33.6 mm with a 6.05 mm thickness, houses a Swiss quartz Ronda Cal. 1062 movement, and features a sapphire crystal. Cases are available in stainless steel or gold PVD, priced at $790 USD / 620 CHF / 675 EUR, with exclusive pre-orders open from May 27 – June 3, 2026.

Explore more from DENNISON: Dennison ALD Dual Time: Chromatic Precision in Grey Dial · DENNISON collection.

Popular Articles